by John Maggs | 17 Jun 2018 | Blog, Knowledgebase
Shure and channel 38 compatibility The Shure BLX K3E radio mic systems which have no frequency display are not quite as channel 38 compatible as they might appear in the sales blurb from suppliers . The problem is that all the groups do not use only frequencies in the... Read more
by John Maggs | 9 Mar 2018 | Blog, Knowledgebase, News
IEC leads. I remember when (kettle leads) first appeared, these were uses to connect the mains to a kettle and were rated at 13 amps. IEC leads had cable which had a cross sectional area of 1.5 mm and they were fitted with plugs with a 13 amp fuse . This arrangement... Read more
by John Maggs | 8 Feb 2017 | Blog, Knowledgebase
PAT – Portable appliance testing FAQs http://www.hse.gov.uk/electricity/faq-portable-appliance-testing.htm I think this will be helpful for you to understand the legal position with regards to Portable appliance testing. in particular the case studies are... Read more
by John Maggs | 10 Dec 2016 | Blog, Knowledgebase
Loop Amplifiers :The good the bad and the downright ugly Loop Amplifiers are great for improving hearing for people, via their hearing aids using the “T” facility, in a church or conference environment, In these places you tend to have people speaking... Read more
by John Maggs | 16 Sep 2016 | Blog, Knowledgebase, News
Combined signal and power cables “Why are the lighting and sound cables different” Well one thing to point out is that dmx uses rs485 and the physical layer of RS 485 requires a cable with a characteristic impedance of 120 ohms This prevents unwanted reflections of... Read more